• Promotions
  • Finance
  • Careers
  • Customer Portal
  • Locations
  • Order Parts
  • Blog
MT 3000-2i Standard
MT 3000-2i Standard
MT 3000-2i Standard
MT 3000-2i Standard
MT 3000-2i Standard
MT 3000-2i Standard
MT 3000-2i Standard
MT 3000-2i Standard

High-performance material feeder for more quality in road construction

This high-performance material feeder is the ideal choice on any major job site organized along modern principles. The extremely high mix storage capacity and the innovative, heavy-duty transfer concept allow non-stop and non-contacting feed of the paver with mix. Up to 1,200 t of mix can be transferred every hour with the MT 3000-2i Standard. The trough-shaped extra-wide conveyor ensures precise feeding with mix and a clean job site.


Specifications

Auger diameter:
400 mm
Auger drive:
separate hydraulic drives
Auger speed:
79 U/min
Augers:
2, in material hopper
Augers, optional:
conical auger for homogenization of the material
Augers, standard:
cylindrical auger
Conveying system capacity (up to):
1,200 t/h
Conveyor:
1 continuous rubber conveyor belt
Conveyor Belt width:
1,100 mm
Conveyor drive:
separate hydraulic drive
Conveyor Screed heating:
infrared heating panel, diesel-operated
Drive Emission Daily noise exposure level :
80 dB
Drive Emission Sound power level :
108 dB
Drive Engine:
liquid-cooled 4-cylinder diesel engine
Drive Exhaust emissions after-treatment:
DOC, DPF, SCR
Drive Exhaust emissions standard:
European exhaust emissions standard 4, US standard EPA Tier 4f
Drive Fuel tank:
450 l
Drive Manufacturer :
Deutz
Drive Nominal output:
160 kW / 2000 U/min
Drive Type:
TCD 6.1
Extra Material Hopper Capacity, 2.5 m machine:
20 t
Extra Material Hopper Capacity, 3 m machine:
25 t
Extra Material Hopper Passive homogenization promoted by use of additional hopper:
18 t
Length:
in transport position
Length in transport position:
8.95 m
Material Hopper capacity of material feeder:
16.4 t
Material Hopper Feed height of material feeder:
600 mm
Material Hopper Positions of material feeder:
can be adjusted in a forward direction by 75 mm or 150 mm
Material Hopper Standard material feeder:
oscillating
Material Hopper Width of material feeder:
3,680 mm
Maximum Laydown Rate:
1,100 t/h
Operating Total Weight:
29,000 kg
Operating Weight Screed:
AB 600 TP2 Plus
Track gauge:
2.36 m
Transport width:
3 m
Undercarriage Crawler tracks:
provided with rubber pads
Undercarriage Ground contact:
3060 mm x 305 mm
Undercarriage Lubrication of track rollers:
lifetime
Undercarriage Speeds Pave speed crawler tracks (up to):
24 m/min
Undercarriage Speeds Travel speed (up to):
4.5 km/h
Undercarriage Track tension adjuster:
spring assembly
Undercarriage Traction drive crawler tracks:
separate hydraulic drives with electronic control
Weight:
19,600 kg
  • Specifications

    Specifications

    Auger diameter:
    400 mm
    Auger drive:
    separate hydraulic drives
    Auger speed:
    79 U/min
    Augers:
    2, in material hopper
    Augers, optional:
    conical auger for homogenization of the material
    Augers, standard:
    cylindrical auger
    Conveying system capacity (up to):
    1,200 t/h
    Conveyor:
    1 continuous rubber conveyor belt
    Conveyor Belt width:
    1,100 mm
    Conveyor drive:
    separate hydraulic drive
    Conveyor Screed heating:
    infrared heating panel, diesel-operated
    Drive Emission Daily noise exposure level :
    80 dB
    Drive Emission Sound power level :
    108 dB
    Drive Engine:
    liquid-cooled 4-cylinder diesel engine
    Drive Exhaust emissions after-treatment:
    DOC, DPF, SCR
    Drive Exhaust emissions standard:
    European exhaust emissions standard 4, US standard EPA Tier 4f
    Drive Fuel tank:
    450 l
    Drive Manufacturer :
    Deutz
    Drive Nominal output:
    160 kW / 2000 U/min
    Drive Type:
    TCD 6.1
    Extra Material Hopper Capacity, 2.5 m machine:
    20 t
    Extra Material Hopper Capacity, 3 m machine:
    25 t
    Extra Material Hopper Passive homogenization promoted by use of additional hopper:
    18 t
    Length:
    in transport position
    Length in transport position:
    8.95 m
    Material Hopper capacity of material feeder:
    16.4 t
    Material Hopper Feed height of material feeder:
    600 mm
    Material Hopper Positions of material feeder:
    can be adjusted in a forward direction by 75 mm or 150 mm
    Material Hopper Standard material feeder:
    oscillating
    Material Hopper Width of material feeder:
    3,680 mm
    Maximum Laydown Rate:
    1,100 t/h
    Operating Total Weight:
    29,000 kg
    Operating Weight Screed:
    AB 600 TP2 Plus
    Track gauge:
    2.36 m
    Transport width:
    3 m
    Undercarriage Crawler tracks:
    provided with rubber pads
    Undercarriage Ground contact:
    3060 mm x 305 mm
    Undercarriage Lubrication of track rollers:
    lifetime
    Undercarriage Speeds Pave speed crawler tracks (up to):
    24 m/min
    Undercarriage Speeds Travel speed (up to):
    4.5 km/h
    Undercarriage Track tension adjuster:
    spring assembly
    Undercarriage Traction drive crawler tracks:
    separate hydraulic drives with electronic control
    Weight:
    19,600 kg
  • Downloads & Documentation

Contact

Contact

Consignment

Request a Service

×

Coastline Equipment Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location