• Promotions
  • Finance
  • Careers
  • Customer Portal
  • Order Parts
  • Blog
MR 100i NEOe
MR 100i NEOe
MR 100i NEOe
MR 100i NEOe

Properties

With the mobile impact crusher MOBIREX MR 100(i) NEOe Kleemann presents the first family member of the new NEO line. Thanks to their compact dimensions and a low transport weight, the MOBIREX MR 100(i) NEOe can be used flexibly, quickly and in a very wide variety of applications. Tight work site conditions or frequent application changes can be overcome easily. Operation ranges from different recycling applications, such as the processing of concrete, rubble and asphalt, to the processing of soft to medium-hard natural stone.

  • Two drive versions available: E-DRIVE and D-DRIVE (only for MR 100(i) NEO)
  • Fully hydraulic gap adjustment and overload system
  • Powerful crusher unit, 4-ledged rotor with large impact range
  • Simple operation thanks to SPECTIVE smaller operating unit

Specifications

CRUSHER - Crusher drive type:
electric
CRUSHER - Crusher inlet (W x H):
40 in x 30 in
CRUSHER - Crusher inlet width:
40 in
CRUSHER - Crusher weight (approx.):
17,700 lbs
CRUSHER - Impact crusher type:
SHB100-075
CRUSHER - Rotor diameter:
39 in
CRUSHER - Type of impact toggle adjustment:
stepless, fully hydraulic
CRUSHER DISCHARGE CONVEYOR - Discharge height approx.:
11 ft
CRUSHER DISCHARGE CONVEYOR - Width:
40 in
FEEDING UNIT - Feed height:
10 ft 6 in
FEEDING UNIT - Hopper length:
7 ft 7 in
FEEDING UNIT - Hopper volume:
4.3 yd³
FEEDING UNIT - Hopper width:
6 ft 7 in
FEEDING UNIT - Max. feed size:
20 in x 32 in x 12 in
POST SCREENING UNIT - Discharge height, fine grain discharge conveyor, approx.:
9 ft 4 in
POST SCREENING UNIT - Return conveyor length:
24 ft 3 in
POST SCREENING UNIT - Return conveyor width:
20 ft
POST SCREENING UNIT - Type:
Vibrating single-deck screen
POST SCREENING UNIT - Width x length approx.:
4 ft 5 in x 10 ft 2 in
POWER SUPPLY UNIT - Drive concept:
E-DRIVE (Diesel-electric)
POWER SUPPLY UNIT - Generator:
260 kVA
POWER SUPPLY UNIT - Power pack manufacturer:
John Deere
POWER SUPPLY UNIT - Power supply unit output:
268 hp
POWER SUPPLY UNIT - Rated speed:
1,500 rpm
PRIMARY SCREENING - Width x length:
5 ft 6 in
SIDE DISCHARGE CONVEYOR - Discharge height:
7 ft 10 in
SIDE DISCHARGE CONVEYOR - Length:
12 ft 10 in
SIDE DISCHARGE CONVEYOR - Width:
20 in
TRANSPORT - Transport height approx. (standard value):
10 ft 6 in
TRANSPORT - Transport length approx.:
41 ft 11 in
TRANSPORT - Transport weight max. configuration approx.:
82,800 lbs
TRANSPORT - Transport weight of basic plant:
65,100 lbs
TRANSPORT - Transport weight of screening unit approx.:
12,130 lbs
TRANSPORT - Transport width approx.:
8 ft 4 in
TRANSPORT - Transport width with secondary screening unit max.:
9 ft 8 in
VIBRATING FEEDER - Width x length:
33 in x 6 ft 7 in

Links

SPECTIVE CONNECT

All relevant data at a glance
> Dashboard
> Camera live image
> Reporting
> Messages and troubleshooting aids
> Overview of all plants in the train




The operator can remain in the excavator/wheel loader
> No interruption to the work process
> Increase in work safety

Continuous Feed System (CFS)

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Always in operation with "Quick Track"

In some applications – for example in road construction – relocation of the crushing plant several times a day is necessary. When this is done, the plant should remain in operating mode so that it is quickly ready for operation again after it has been moved. The "Quick Track" option allows this to be controlled conveniently via the remote control – without leaving the operating mode.

Thanks to the time-saving (excavator driver does not need to go to the display, change operating mode, machine operation is not interrupted and therefore does not need to be started up again), the machine can continue working fast and productively.

  • Specifications

    Specifications

    CRUSHER - Crusher drive type:
    electric
    CRUSHER - Crusher inlet (W x H):
    40 in x 30 in
    CRUSHER - Crusher inlet width:
    40 in
    CRUSHER - Crusher weight (approx.):
    17,700 lbs
    CRUSHER - Impact crusher type:
    SHB100-075
    CRUSHER - Rotor diameter:
    39 in
    CRUSHER - Type of impact toggle adjustment:
    stepless, fully hydraulic
    CRUSHER DISCHARGE CONVEYOR - Discharge height approx.:
    11 ft
    CRUSHER DISCHARGE CONVEYOR - Width:
    40 in
    FEEDING UNIT - Feed height:
    10 ft 6 in
    FEEDING UNIT - Hopper length:
    7 ft 7 in
    FEEDING UNIT - Hopper volume:
    4.3 yd³
    FEEDING UNIT - Hopper width:
    6 ft 7 in
    FEEDING UNIT - Max. feed size:
    20 in x 32 in x 12 in
    POST SCREENING UNIT - Discharge height, fine grain discharge conveyor, approx.:
    9 ft 4 in
    POST SCREENING UNIT - Return conveyor length:
    24 ft 3 in
    POST SCREENING UNIT - Return conveyor width:
    20 ft
    POST SCREENING UNIT - Type:
    Vibrating single-deck screen
    POST SCREENING UNIT - Width x length approx.:
    4 ft 5 in x 10 ft 2 in
    POWER SUPPLY UNIT - Drive concept:
    E-DRIVE (Diesel-electric)
    POWER SUPPLY UNIT - Generator:
    260 kVA
    POWER SUPPLY UNIT - Power pack manufacturer:
    John Deere
    POWER SUPPLY UNIT - Power supply unit output:
    268 hp
    POWER SUPPLY UNIT - Rated speed:
    1,500 rpm
    PRIMARY SCREENING - Width x length:
    5 ft 6 in
    SIDE DISCHARGE CONVEYOR - Discharge height:
    7 ft 10 in
    SIDE DISCHARGE CONVEYOR - Length:
    12 ft 10 in
    SIDE DISCHARGE CONVEYOR - Width:
    20 in
    TRANSPORT - Transport height approx. (standard value):
    10 ft 6 in
    TRANSPORT - Transport length approx.:
    41 ft 11 in
    TRANSPORT - Transport weight max. configuration approx.:
    82,800 lbs
    TRANSPORT - Transport weight of basic plant:
    65,100 lbs
    TRANSPORT - Transport weight of screening unit approx.:
    12,130 lbs
    TRANSPORT - Transport width approx.:
    8 ft 4 in
    TRANSPORT - Transport width with secondary screening unit max.:
    9 ft 8 in
    VIBRATING FEEDER - Width x length:
    33 in x 6 ft 7 in
  • Downloads & Documentation

    Links

  • Details

    SPECTIVE CONNECT

    All relevant data at a glance
    > Dashboard
    > Camera live image
    > Reporting
    > Messages and troubleshooting aids
    > Overview of all plants in the train




    The operator can remain in the excavator/wheel loader
    > No interruption to the work process
    > Increase in work safety

    Continuous Feed System (CFS)

    Uniform loading is indispensable for a good product, optimum throughput and low wear.

    To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

    Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

    The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

    Always in operation with "Quick Track"

    In some applications – for example in road construction – relocation of the crushing plant several times a day is necessary. When this is done, the plant should remain in operating mode so that it is quickly ready for operation again after it has been moved. The "Quick Track" option allows this to be controlled conveniently via the remote control – without leaving the operating mode.

    Thanks to the time-saving (excavator driver does not need to go to the display, change operating mode, machine operation is not interrupted and therefore does not need to be started up again), the machine can continue working fast and productively.

Contact

Contact

Consignment

Request a Service

×

Coastline Equipment Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Coastline Equipment Employee Portal