• Promotions
  • Finance
  • Careers
  • Customer Portal
  • Locations
  • Order Parts
  • Blog
MC 160 PRR
MC 160 PRR
MC 160 PRR
MC 160 PRR
MC 160 PRR
MC 160 PRR
MC 160 PRR
MC 160 PRR

The MC 160 PRR is the largest tracked mobile jaw crusher plant from Kleemann. The core of the plant is the jaw crusher of type SStR 1600, with a weight of almost 80 tons, which can receive material with an edge length of up to 1500 x 900 mm. With a feed capacity of up to 1200 tons per hour, the MC 160 PRR a true workaholic.

  • Two units: feeding unit with apron conveyor, main unit with roll screen
  • Each unit has a separate crawler chassis
  • Feeding with dump trucks (45 t load capacity) possible

Features

  • Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values: The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time. An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher. All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

  • Jaw crusher: Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Specifications

Crusher Gap setting:
Hydraulically supported
Crusher inlet (W x D):
1600 mm x 1250 mm
Feed capacity up to approx.:
1,200 t/h
Feed height with extension:
7,500 mm
Feed Hopper volume:
60 m³
Feed size:
1500 mm x 1100 mm
Feeding height:
6,700 mm
  • Features

    Features

    • Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values: The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time. An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher. All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

    • Jaw crusher: Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

  • Specifications

    Specifications

    Crusher Gap setting:
    Hydraulically supported
    Crusher inlet (W x D):
    1600 mm x 1250 mm
    Feed capacity up to approx.:
    1,200 t/h
    Feed height with extension:
    7,500 mm
    Feed Hopper volume:
    60 m³
    Feed size:
    1500 mm x 1100 mm
    Feeding height:
    6,700 mm

Contact

Contact

Consignment

Request a Service

×

Coastline Equipment Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location