MCO 11 PRO
MCO 11 PRO
MCO 11 PRO
MCO 11 PRO
MCO 11 PRO
MCO 11 PRO
MCO 11 PRO
MCO 11 PRO

The MOBICONE MCO 11 PRO mobile cone crusher stands out thanks to its extremely robust design and impressive performance. As an option, the plant can be operated using an external power source and it requires impressively little maintenance.

  • Extremely robust design
  • Very high production output with low-maintenance operation
  • Diesel-electric drive concept with the option to connect an external power supply
  • Ideal for combination with upstream MOBICAT MC 120 Z PRO jaw crusher

Features

  • Continuous Feed System (CFS): Uniform loading is indispensible for a good product, optimum throughput and low wear. To ensure that the long crushing chamber is always evenly, the Continuous Feed System (CFS) monitors the crush level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilisation (impact crusher).

  • Intuitive control concept SPECTIVE - for simple operation: The easy-to-operate control concept SPECTIVE allows the machines to be operated at a touch panel. All components and functions can be controlled comfortably from the ground. SPECTIVE guides the operator step by step through the starting procedure. The start screen provides a graphical view of the plant with all adjustable functions at a glance. When the desired function is selected, clear instructions guide users through all operating steps. If a fault occurs, a fault diagnosis appears on the display. Fault localisation, the description and remedy tips result in reduced downtimes. The 12" touch panel is resistant to dust and always easy to read thanks to the light intensity and high contrast. It reacts to fingers, pen or gloves.

  • Ring Bounce Detection: During ring bounce, a movement is created between the bowl and the main frame of the cone crusher as a result of excessive crushing forces. This is triggered by feed sizes that are too large or small, an excessive fine content or the continuous feeding of uncrushable material. To protect the crusher, software continuously monitors the hydraulic pressure of the crusher overload system and reacts when necessary with two modes: Mode 1 – PRECISE MODEfor the production of grit: the machine stops feeding if ring bounce is detected; the operator receives a fault message and can adapt his process. This mode assures that no impermissible oversize grain is produced and the machine is protected against crusher damage. Mode 2 – MIXTURE MODEfor the production of mixtures: in this mode, the machine adjusts the crushing gap - without intervention of the operator - automatically to prevent ring bounce. After a defined period without ring bounce, the gap is closed again to keep the share of oversize grain as low as possible.

  • Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values: The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time. An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher. All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

  • Everything at a glance with WITOS®: The WITOS FleetView telematic system provides support for efficient fleet and service management. It provides information on the operating status of the machine independently of the location and time. Even users with only one machine benefit from WITOS. From support for maintenance and diagnostic processes to the targeted control of the machines: the range of services is diversified and it is an ideal supplement to the WIRTGEN GROUP Smart Service agreements.

Specifications

Crusher discharge conveyor length:
9,200 mm
Crusher discharge conveyor length, extended:
10,700 mm
Crusher discharge conveyor width:
1,000 mm
Crusher discharge conveyor width, extended:
1,000 mm
Crusher Discharge height approx.:
3,600 mm
Crusher Discharge height, extended approx.:
4,190 mm
Crusher drive type:
Electric
Crusher system size:
1,120 mm
Crusher weight (approx.):
16,200 kg
Crushing power:
250 kW
Feed capacity up to approx.:
470 t/h
Feed height with extension:
3,000 mm
Feed Hopper length:
4,130 mm
Feed Hopper length with extension:
4,130 mm
Feed Hopper volume:
7.5 m³
Feed Hopper volume with extension:
9.2 m³
Feed Hopper width:
1,825 mm
Feed Hopper width with extension:
4,200 mm
Feed size:
240 mm
Feeding height:
2,660 mm
Power Supply Unit Drive concept:
Diesel-electric drive
Power Supply Unit Generator (1500 rpm):
500 kVA
Power Supply Unit Output LRC (1500 rpm):
410 kW
Power Supply Unit Output Tier 3 / Stage IIIA (1500 rpm):
371 kW
Transport height approx. (default value):
3,850 mm
Transport length approx.:
17,595 mm
Transport width max.:
3,000 mm
  • Features

    Features

    • Continuous Feed System (CFS): Uniform loading is indispensible for a good product, optimum throughput and low wear. To ensure that the long crushing chamber is always evenly, the Continuous Feed System (CFS) monitors the crush level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilisation (impact crusher).

    • Intuitive control concept SPECTIVE - for simple operation: The easy-to-operate control concept SPECTIVE allows the machines to be operated at a touch panel. All components and functions can be controlled comfortably from the ground. SPECTIVE guides the operator step by step through the starting procedure. The start screen provides a graphical view of the plant with all adjustable functions at a glance. When the desired function is selected, clear instructions guide users through all operating steps. If a fault occurs, a fault diagnosis appears on the display. Fault localisation, the description and remedy tips result in reduced downtimes. The 12" touch panel is resistant to dust and always easy to read thanks to the light intensity and high contrast. It reacts to fingers, pen or gloves.

    • Ring Bounce Detection: During ring bounce, a movement is created between the bowl and the main frame of the cone crusher as a result of excessive crushing forces. This is triggered by feed sizes that are too large or small, an excessive fine content or the continuous feeding of uncrushable material. To protect the crusher, software continuously monitors the hydraulic pressure of the crusher overload system and reacts when necessary with two modes: Mode 1 – PRECISE MODEfor the production of grit: the machine stops feeding if ring bounce is detected; the operator receives a fault message and can adapt his process. This mode assures that no impermissible oversize grain is produced and the machine is protected against crusher damage. Mode 2 – MIXTURE MODEfor the production of mixtures: in this mode, the machine adjusts the crushing gap - without intervention of the operator - automatically to prevent ring bounce. After a defined period without ring bounce, the gap is closed again to keep the share of oversize grain as low as possible.

    • Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values: The crushers of the EVO line have an innovative "diesel-direct electric" drive concept and are powerful and economical at the same time. An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher. All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.

    • Everything at a glance with WITOS®: The WITOS FleetView telematic system provides support for efficient fleet and service management. It provides information on the operating status of the machine independently of the location and time. Even users with only one machine benefit from WITOS. From support for maintenance and diagnostic processes to the targeted control of the machines: the range of services is diversified and it is an ideal supplement to the WIRTGEN GROUP Smart Service agreements.

  • Specifications

    Specifications

    Crusher discharge conveyor length:
    9,200 mm
    Crusher discharge conveyor length, extended:
    10,700 mm
    Crusher discharge conveyor width:
    1,000 mm
    Crusher discharge conveyor width, extended:
    1,000 mm
    Crusher Discharge height approx.:
    3,600 mm
    Crusher Discharge height, extended approx.:
    4,190 mm
    Crusher drive type:
    Electric
    Crusher system size:
    1,120 mm
    Crusher weight (approx.):
    16,200 kg
    Crushing power:
    250 kW
    Feed capacity up to approx.:
    470 t/h
    Feed height with extension:
    3,000 mm
    Feed Hopper length:
    4,130 mm
    Feed Hopper length with extension:
    4,130 mm
    Feed Hopper volume:
    7.5 m³
    Feed Hopper volume with extension:
    9.2 m³
    Feed Hopper width:
    1,825 mm
    Feed Hopper width with extension:
    4,200 mm
    Feed size:
    240 mm
    Feeding height:
    2,660 mm
    Power Supply Unit Drive concept:
    Diesel-electric drive
    Power Supply Unit Generator (1500 rpm):
    500 kVA
    Power Supply Unit Output LRC (1500 rpm):
    410 kW
    Power Supply Unit Output Tier 3 / Stage IIIA (1500 rpm):
    371 kW
    Transport height approx. (default value):
    3,850 mm
    Transport length approx.:
    17,595 mm
    Transport width max.:
    3,000 mm
  • Downloads & Documentation

Contact

Contact

Consignment

Request a Service

×

Coastline Equipment Employee Portal

×

Your session will expire in  seconds. If you want to reset this timer, please click OK.