John Deere 210L EP Tractor Loader
Tractor Loaders
How can we help?
(208) 324-2900
Features
-
Operating Weight: 4,794 kg (10,569 lb.)
-
Breakout Force: 36.7 kN (8,245 lb.)
-
Lift Capacity: 2,529 kg (5,575 lb.)
-
Net Power: 51 kW (69 hp)
Specifications
CAPACITIES - Alternator capacity, Amp: |
130 |
CAPACITIES - Fuel tank capacity, ltr (gallons (US)): |
117.3 (31) |
CAPACITIES - Hydraulic tank capacity, ltr (gallons (US)): |
45 (11.9) |
CAPACITIES - Shovel cap SAE heaped, m³ (yd³): |
0.86 (1.12) |
DIMENSIONS - Bucket Hinge Pin - Max Height, mm (ft/in): |
3360 (11 ft ) |
DIMENSIONS - Coupler: |
Pin-On |
DIMENSIONS - Dump Clearance @ 45 deg, mm (ft/in): |
2660 (8 ft 11 in) |
DIMENSIONS - Dump Reach, mm (inches): |
765 (30.1) |
DIMENSIONS - Minimum transport height, mm (ft/in): |
2620 (8 ft 7 in) |
DIMENSIONS - Overall length, mm (ft/in): |
5310 (17 ft 5 in) |
DIMENSIONS - Overall width, mm (ft/in): |
2130 (7 ft ) |
DIMENSIONS - Std shovel width, mm (inches): |
2184 (86) |
DRIVELINE - Displacement, ltr (Inches³): |
3.3 (203) |
DRIVELINE - Emission rating: |
Interim Tier 4 |
DRIVELINE - Engine manufacturer : |
Yanmar |
DRIVELINE - Engine model: |
4TNV98CT |
DRIVELINE - Front axle type: |
Mechanical FWD |
DRIVELINE - Net output, kW (hp): |
51 (69) |
DRIVELINE - Number of speeds - forward: |
4 |
DRIVELINE - Number of speeds - reverse: |
2 |
DRIVELINE - Rated speed, rpm: |
2010 |
DRIVELINE - Service actuation: |
Hydraulic w/Power Assist |
DRIVELINE - Service type: |
Wet Multi Disc |
DRIVELINE - Transmission type: |
Power Shift |
PERFORMANCE - Breakout force std shovel, kN (lbf): |
38.7 (8700) |
PERFORMANCE - Lift Capacity to Full Height, kg (lbs): |
2876 (6340) |
PERFORMANCE - Max. Forward Speed, kph (mph): |
36.2 (22.5) |
PERFORMANCE - Max. Reverse Speed, kph (mph): |
12.2 (7.6) |
PERFORMANCE - Oscillation angle, ± Degrees: |
22 |
PERFORMANCE - Power Take Off: |
No |
PERFORMANCE - Pump flow, lt/min (gallons (US) / min): |
104 (27.5) |
PERFORMANCE - Pump type: |
Gear |
PERFORMANCE - System pressure, bar (PSI): |
220.63 (3200) |
PERFORMANCE - System voltage, V: |
12 |
WEIGHTS - Operating weight, kg (lbs): |
4794 (10569) |
Engine
The 210L EP Interim Tier 4 (IT4)/Stage IIIB emission-certified Yanmar 3.3L engine requires no aftertreatment.
Field-proven technology is simple, fluid efficient, fully integrated, and fully supported. It employs cooled exhaust gas recirculation and selective catalytic reduction.
Operator Comfort
Choose cab or open operator station.
Higher canopy with wider and lower step provides better visibility over the hood and to the corners of the front bucket, as well as to the rear box blade. Makes it easier to service under-canopy components, too.
Easy Maintenance
Two-position tilt hood provides same-side ground-level access to engine and transmission dipsticks, engine-oil fill, fuel and air filters, and coolant reservoir. Fuel fill is also closely convenient.
Productivity
New hitch design makes it easier to position the box blade over the pile for more versatility and productivity.
Integral three-point hitch accommodates a variety of tools
Ride Control
With ride control activated, front loader hydraulic cylinders act as a shock absorber, smoothing travel over rough terrain, helping full loads reach their destination, and reducing operator fatigue.
Mechanical-Front-Wheel Drive
Mechanical-front-wheel drive (MFWD) and differential lock can be engaged on-the-go to give extra traction in poor underfoot conditions or for moving heavy loads. Optional limited-slip front axle delivers 65 percent of available power to the tire with the best traction. For true all-wheel-drive pulling power.
Eco Mode
Standard economy mode helps maximize fuel usage in lighter-work applications with minimal effect on machine performance.
