EX8000-6
EX8000-6
EX8000-6
EX8000-6
EX8000-6
EX8000-6
EX8000-6
EX8000-6
EX8000-6
EX8000-6
Big-time productivity

There’s no job too big for the EX8000-6.* It’s our largest mining shovel, and it delivers incredible arm crowding, breakout force and horsepower. You get efficient engines, a comfortable cab, advanced hydraulics, a tough frame and powerful arm- and bucket-digging forces so you can get more work done every day.

The EX8000-6 comes standard equipped with Hitachi’s Global e-Service remote machine management system, which gives you access to each on-site machine from a PC in your office.

*Also available in the U.S. and Latin America as an electric drive shovel. Download Features and Specs Brochure for more information.

Features

  • With Global e-Service, an online machine management system, you can access each on-site machine from a PC in your office. You can get its operating information and location to increase productivity. Operating data and log are sent to a Hitachi server for processing, and then to customer and dealers. This system is available 24/7/365.

  • Tackle any job with twin Cummins QSK60C diesel engines that meet U.S. EPA Tier 2 emission regulations.

  • The air-suspension, multi-position seat can be customized to the operator’s needs and seat can be adjusted to accommodate the operator’s weight and personal preference.

  • The multi-display LCD monitor provides machine data, operating status and alerts at a glance. The monitor can be preset to indicate replacement intervals for engine oil, hydraulic oil and filters.

  • The auto-lubrication system for the front joint pins and swing circle saves service time.

  • Plenty of utility space located behind the operator seat allows for 24-hour operation. The space can accommodate a table, electric oven and refrigerator.

  • Folding stairs with wide steps allow for easy accessibility, servicing and maintenance.

  • High-pressure filters are located down-line from the pumps for easy maintenance.

  • Four optional outside cameras can be mounted around the machine for enhanced visibility – virtually eliminating blind spots

  • A protective steel barrier between the engine and pump bulkhead contributes to lower heat and less potential for damage.

  • Flow-retarding control at cylinder stroke ends improves controllability and helps extend service life. This mechanism is provided for arm/bucket roll-in and roll-out.

  • The cast steel, center track frame can avoid stress concentration and increase reliability.

  • The well-insulated, pressurized cab keeps out dust and is air conditioned.

  • The sturdy cab protects operators from falling objects. The cab’s top guard meets OPG Level II (ISO) standards. The entire cab sits on a package of fluid-filled elastic mounts that absorb vibration for a more comfortable ride.

  • Rugged lower rollers, track shoes and drive tumblers sustain the giant body for increased durability.

  • Convenient centralized filter system designed to make filter inspection and maintenance easier.

  • Electric joystick control levers provide precise and almost effortless operation.

  • Using the meter-in valves, ample capacity make-up valves and flow-assisting pumps, the flow speed is increased in cylinders for dynamic actions, like between dumping and digging.

  • With constant correct track tension, travel is automatically stopped if the nitrogen gas accumulator pressure exceeds a preset level. Alert information and countermeasures are indicated on the multi-display LCD monitor.

  • A contamination sensor alerts the operator of accumulated contaminants in the oil before damage might occur.

  • The rigid box design resists bending and twisting forces, giving you stability and strength on any job.

  • The high-visibility, nine-meter (29 ft. 6 in.) cab height provides a clear view of the work site – even when loading the largest trucks.

  • Ejectors automatically expel dust from the air cleaners, giving you one less routine maintenance task.

Specifications

Carrier Rollers - Each Side:
3
Dig depth (mono):
8400 mm 27 ft 7 in ft/in
Dig depth - 2.44m / 8'ft flat bottom:
8300 mm 27 ft 3 in ft/in
Dig height (mono):
19000 mm 62 ft 4 in ft/in
Dipper Tearout:
1770 kN 397910 lbf
Displacement:
60 ltr 3661 Inches³
Dump Height (Mono):
11900 mm 39 ft ft/in
Emission Rating:
Tier 2
Fuel Tank:
14900 ltr 3936.2 gallons (US)
Ground Bearing Pressure:
252 kPa 36.5 PSI
Ground Clearance:
1250 mm 49 inches
Ground level reach (mono):
21400 mm 70 ft 3 in ft/in
Hydraulic Tank:
3890 ltr 1027.6 gallons (US)
Max Digging Reach (Mono):
22300 mm 73 ft 2 in ft/in
Net Power:
2 x 1450 kW 2 x 1,944 hp
Number Of Cylinders - Per Engine:
16
Rated Speed:
1800 rpm
Tailswing Radius:
8280 mm 27 ft 2 in ft/in
Track Gauge:
6800 mm 22 ft 4 in ft/in
Track Length On Ground:
7900 mm 25 ft 11 in ft/in
Track Rollers - Each Side:
7
Track Shoe Width:
1850 mm 73 inches
Transport Height - Maximum:
9900 mm 32 ft 6 in ft/in
Transport Length:
13260 mm 43 ft 6 in ft/in
Undercarriage Overall Length:
10500 mm 34 ft 5 in ft/in
Width over standard tracks:
8650 mm 28 ft 5 in ft/in
  • Features

    Features

    • With Global e-Service, an online machine management system, you can access each on-site machine from a PC in your office. You can get its operating information and location to increase productivity. Operating data and log are sent to a Hitachi server for processing, and then to customer and dealers. This system is available 24/7/365.

    • Tackle any job with twin Cummins QSK60C diesel engines that meet U.S. EPA Tier 2 emission regulations.

    • The air-suspension, multi-position seat can be customized to the operator’s needs and seat can be adjusted to accommodate the operator’s weight and personal preference.

    • The multi-display LCD monitor provides machine data, operating status and alerts at a glance. The monitor can be preset to indicate replacement intervals for engine oil, hydraulic oil and filters.

    • The auto-lubrication system for the front joint pins and swing circle saves service time.

    • Plenty of utility space located behind the operator seat allows for 24-hour operation. The space can accommodate a table, electric oven and refrigerator.

    • Folding stairs with wide steps allow for easy accessibility, servicing and maintenance.

    • High-pressure filters are located down-line from the pumps for easy maintenance.

    • Four optional outside cameras can be mounted around the machine for enhanced visibility – virtually eliminating blind spots

    • A protective steel barrier between the engine and pump bulkhead contributes to lower heat and less potential for damage.

    • Flow-retarding control at cylinder stroke ends improves controllability and helps extend service life. This mechanism is provided for arm/bucket roll-in and roll-out.

    • The cast steel, center track frame can avoid stress concentration and increase reliability.

    • The well-insulated, pressurized cab keeps out dust and is air conditioned.

    • The sturdy cab protects operators from falling objects. The cab’s top guard meets OPG Level II (ISO) standards. The entire cab sits on a package of fluid-filled elastic mounts that absorb vibration for a more comfortable ride.

    • Rugged lower rollers, track shoes and drive tumblers sustain the giant body for increased durability.

    • Convenient centralized filter system designed to make filter inspection and maintenance easier.

    • Electric joystick control levers provide precise and almost effortless operation.

    • Using the meter-in valves, ample capacity make-up valves and flow-assisting pumps, the flow speed is increased in cylinders for dynamic actions, like between dumping and digging.

    • With constant correct track tension, travel is automatically stopped if the nitrogen gas accumulator pressure exceeds a preset level. Alert information and countermeasures are indicated on the multi-display LCD monitor.

    • A contamination sensor alerts the operator of accumulated contaminants in the oil before damage might occur.

    • The rigid box design resists bending and twisting forces, giving you stability and strength on any job.

    • The high-visibility, nine-meter (29 ft. 6 in.) cab height provides a clear view of the work site – even when loading the largest trucks.

    • Ejectors automatically expel dust from the air cleaners, giving you one less routine maintenance task.

  • Specifications

    Specifications

    Carrier Rollers - Each Side:
    3
    Dig depth (mono):
    8400 mm 27 ft 7 in ft/in
    Dig depth - 2.44m / 8'ft flat bottom:
    8300 mm 27 ft 3 in ft/in
    Dig height (mono):
    19000 mm 62 ft 4 in ft/in
    Dipper Tearout:
    1770 kN 397910 lbf
    Displacement:
    60 ltr 3661 Inches³
    Dump Height (Mono):
    11900 mm 39 ft ft/in
    Emission Rating:
    Tier 2
    Fuel Tank:
    14900 ltr 3936.2 gallons (US)
    Ground Bearing Pressure:
    252 kPa 36.5 PSI
    Ground Clearance:
    1250 mm 49 inches
    Ground level reach (mono):
    21400 mm 70 ft 3 in ft/in
    Hydraulic Tank:
    3890 ltr 1027.6 gallons (US)
    Max Digging Reach (Mono):
    22300 mm 73 ft 2 in ft/in
    Net Power:
    2 x 1450 kW 2 x 1,944 hp
    Number Of Cylinders - Per Engine:
    16
    Rated Speed:
    1800 rpm
    Tailswing Radius:
    8280 mm 27 ft 2 in ft/in
    Track Gauge:
    6800 mm 22 ft 4 in ft/in
    Track Length On Ground:
    7900 mm 25 ft 11 in ft/in
    Track Rollers - Each Side:
    7
    Track Shoe Width:
    1850 mm 73 inches
    Transport Height - Maximum:
    9900 mm 32 ft 6 in ft/in
    Transport Length:
    13260 mm 43 ft 6 in ft/in
    Undercarriage Overall Length:
    10500 mm 34 ft 5 in ft/in
    Width over standard tracks:
    8650 mm 28 ft 5 in ft/in
  • Downloads & Documentation

Contact

Contact

Consignment

Request a Service