EX2600-7
EX2600-7
EX2600-7
EX2600-7
EX2600-7
EX2600-7
EX2600-7
EX2600-7
EX2600-7
EX2600-7
EX2600-7
EX2600-7
Rock solid performance

The EX2600-7 is a powerful workhorse you can count on. The machine features the latest advancements in engine and fuel optimization technologies to provide you with efficiency, reliability and durability in the toughest mines.

You get strong horsepower, reduced fuel consumption through engine selection and hydraulic system improvements, simplified maintenance, a comfortable cab, powerful arm and bucket-digging forces and more. It’s available in backhoe and front-shovel configuration, and you can choose between a Cummins or MTU engine.*

The EX2600-7 comes standard equipped with Hitachi’s Global e-Service remote machine management system, which gives you access to each on-site machine from a PC in your office.

*Also available in the U.S. and Latin America as an electric powered shovel. Download Features and Specs Brochure for more information

Features

  • The automatic weight-adjusting air suspension seat determines the optimal cushioning effect to match the operator’s weight, enhancing comfort and minimizing vibration.

  • The Loading Shovel attachment is equipped with an auto-leveling crowd mechanism that controls the bucket at a constant angle.

  • The EX2600-7 undercarriage has three double-sided pedestal-designed upper rollers on each side of the track frame to maintain track shoe clearance and provide protection from debris buildup, reducing shoe and roller wear.

  • A Hitachi TFOA-KK electric motor option is available in the U.S. and Latin American markets. The motor’s voltage of AC 6000 - 6600 V/50 Hz results in a rated continuous output of 860kw.

  • Front attachment hoses have been rearranged from the traditional arch style to an underslung configuration, removing the need for clamping, reducing chafing and increasing reliability.

  • The new on-board electronic controller receives signals from angle sensors fitted to the main frame, boom and arm to control the pump flow rate and cylinder speed. Shock at stroke end of the cylinder cycle is reduced, improving operator comfort and lowering impact on cylinders and structures for more reliable operation.

  • Computer assisted analysis is used to determine the most effective design for frame longevity to withstand the demands of the mining operation.

  • The centralized fast-filling system provides easy access from the ground to refill and evacuate lubricants, water, grease and fuel.

  • Contamination sensors are located on all main hydraulic pumps to detect any contaminants that may cause damage to the hydraulic system.

  • Hitachi’s exclusive center track frame delivers optimal stress dispersion through the use of specifically designed castings to reduce welds in critical high stress areas, ensuring a stronger frame with improved durability and reliability.

  • The advanced hydraulic system tops the industry for smooth, efficient, combined operations of the front attachment and swing, delivering quick cycle times.

  • The multi-functional display provides key machine information, performance indicators and on-board troubleshooting functionality through the use of the integrated dial switch interface. It’s fitted with an LED back-light to provide improved clarity with reduced glare and reflection.

  • Choice of Cummins or MTU engine in Final Tier 4 (FT4) or Fuel Calibration Optimized (FCO) configurations.

  • With Global e-Service, an online machine management system, you can access each on-site machine from a PC in your office. You can get its operating information and location to increase productivity. Operating data and log are sent to a Hitachi server for processing, and then to customer and dealers. This system is available 24/7/365.

  • Fuel Consumption Optimization (FCO) technologies reduce fuel consumption by 8-10 percent through engine options and hydraulic system improvements. (*comparison of Cummins engine configuration against the EX2600-6).

  • The cab riser features a pressurizer system to reduce dust infiltration, extending service life of the electronic components and devices within.

  • The Level II Operator Protective Guard (OPG) provides protection from falling objects, ensuring an added layer of safety and assurance to the operator.

  • A larger hydraulic oil cooler with variable speed fan reduces energy demand and creates a more reliable hydraulic system.

  • Tinted, laminated windows and retractable front and side roll screens help to reduce heat, glare and harmful UV rays.

  • Each individually controlled hydraulic pump has its own electric regulator, enhancing engine power, lowering fuel consumption, and increasing productivity to lower the total cost of operation.

  • The new center joint uses the machine’s hydraulic oil to self-lubricate, reducing the need for daily maintenance.

  • The on-board inclinometer assists the operator with two predetermined safety limits providing extra assurance and confidence

  • An escape chute has been added to the side of the cab for use in an emergency.

  • Swing circle cover has been added to the outside of the swing bearing to provide protection to the lubrication piping against damage from debris.

  • The optional Aerial Angle system provides the operator with a real-time birds-eye view around their excavator. Cameras strategically mounted on the machine combine to a single aerial view of the EX2600-7 surroundings. Multiple screen display options can be selected on the cab’s 7-inch Aerial Angle monitor for ease of operation.

  • Integrated electronic joysticks enable precise and almost effortless operation, minimizing operator fatigue and improving operational performance.

  • The proven Hitachi-patented track shoe design mitigates premature wear of the drive-lugs. Each shoe is induction hardened utilizing Hitachi’s unique processes to deliver a more durable solution.

Specifications

Carrier Rollers - Each Side:
3
Dig depth (mono):
8250 mm 27 ft 1 in ft/in
Dig depth - 2.44m / 8'ft flat bottom:
8150 mm 26 ft 9 in ft/in
Dig height (mono):
15800 mm 51 ft 10 in ft/in
Dipper Tearout:
785 kN 176475 lbf
Displacement:
50 ltr 3051.1 Inches³
Dump Height (Mono):
10100 mm 33 ft 2 in ft/in
Engine Output Per Engine- Net:
1069 kW 1434 hp
Fuel Tank:
5300 ltr 1400 gallons (US)
Ground Bearing Pressure:
187 kPa 27.1 PSI
Ground Clearance:
770 mm 30 inches
Ground level reach (mono):
16050 mm 52 ft 8 in ft/in
Hydraulic Tank:
1320 ltr 349 gallons (US)
Max Digging Reach (Mono):
16600 mm 54 ft 6 in ft/in
Net Power:
1119 kW 1,500 hp
Number Of Cylinders - Per Engine:
16
Overall Width:
8040 mm 26 ft 5 in ft/in
Rated Speed:
1800 rpm
Tailswing Radius:
6490 mm 21 ft 4 in ft/in
Track Gauge:
5000 mm 16 ft 5 in ft/in
Track Length On Ground:
6120 mm 20 ft 1 in ft/in
Track Rollers - Each Side:
8
Track Shoe Width:
1000 mm 40 inches
Undercarriage Overall Length:
7870 mm 25 ft 10 in ft/in
Weight - Maximum:
257000 kg 566588 lbs
Width over standard tracks:
6000 mm 19 ft 8 in ft/in
  • Features

    Features

    • The automatic weight-adjusting air suspension seat determines the optimal cushioning effect to match the operator’s weight, enhancing comfort and minimizing vibration.

    • The Loading Shovel attachment is equipped with an auto-leveling crowd mechanism that controls the bucket at a constant angle.

    • The EX2600-7 undercarriage has three double-sided pedestal-designed upper rollers on each side of the track frame to maintain track shoe clearance and provide protection from debris buildup, reducing shoe and roller wear.

    • A Hitachi TFOA-KK electric motor option is available in the U.S. and Latin American markets. The motor’s voltage of AC 6000 - 6600 V/50 Hz results in a rated continuous output of 860kw.

    • Front attachment hoses have been rearranged from the traditional arch style to an underslung configuration, removing the need for clamping, reducing chafing and increasing reliability.

    • The new on-board electronic controller receives signals from angle sensors fitted to the main frame, boom and arm to control the pump flow rate and cylinder speed. Shock at stroke end of the cylinder cycle is reduced, improving operator comfort and lowering impact on cylinders and structures for more reliable operation.

    • Computer assisted analysis is used to determine the most effective design for frame longevity to withstand the demands of the mining operation.

    • The centralized fast-filling system provides easy access from the ground to refill and evacuate lubricants, water, grease and fuel.

    • Contamination sensors are located on all main hydraulic pumps to detect any contaminants that may cause damage to the hydraulic system.

    • Hitachi’s exclusive center track frame delivers optimal stress dispersion through the use of specifically designed castings to reduce welds in critical high stress areas, ensuring a stronger frame with improved durability and reliability.

    • The advanced hydraulic system tops the industry for smooth, efficient, combined operations of the front attachment and swing, delivering quick cycle times.

    • The multi-functional display provides key machine information, performance indicators and on-board troubleshooting functionality through the use of the integrated dial switch interface. It’s fitted with an LED back-light to provide improved clarity with reduced glare and reflection.

    • Choice of Cummins or MTU engine in Final Tier 4 (FT4) or Fuel Calibration Optimized (FCO) configurations.

    • With Global e-Service, an online machine management system, you can access each on-site machine from a PC in your office. You can get its operating information and location to increase productivity. Operating data and log are sent to a Hitachi server for processing, and then to customer and dealers. This system is available 24/7/365.

    • Fuel Consumption Optimization (FCO) technologies reduce fuel consumption by 8-10 percent through engine options and hydraulic system improvements. (*comparison of Cummins engine configuration against the EX2600-6).

    • The cab riser features a pressurizer system to reduce dust infiltration, extending service life of the electronic components and devices within.

    • The Level II Operator Protective Guard (OPG) provides protection from falling objects, ensuring an added layer of safety and assurance to the operator.

    • A larger hydraulic oil cooler with variable speed fan reduces energy demand and creates a more reliable hydraulic system.

    • Tinted, laminated windows and retractable front and side roll screens help to reduce heat, glare and harmful UV rays.

    • Each individually controlled hydraulic pump has its own electric regulator, enhancing engine power, lowering fuel consumption, and increasing productivity to lower the total cost of operation.

    • The new center joint uses the machine’s hydraulic oil to self-lubricate, reducing the need for daily maintenance.

    • The on-board inclinometer assists the operator with two predetermined safety limits providing extra assurance and confidence

    • An escape chute has been added to the side of the cab for use in an emergency.

    • Swing circle cover has been added to the outside of the swing bearing to provide protection to the lubrication piping against damage from debris.

    • The optional Aerial Angle system provides the operator with a real-time birds-eye view around their excavator. Cameras strategically mounted on the machine combine to a single aerial view of the EX2600-7 surroundings. Multiple screen display options can be selected on the cab’s 7-inch Aerial Angle monitor for ease of operation.

    • Integrated electronic joysticks enable precise and almost effortless operation, minimizing operator fatigue and improving operational performance.

    • The proven Hitachi-patented track shoe design mitigates premature wear of the drive-lugs. Each shoe is induction hardened utilizing Hitachi’s unique processes to deliver a more durable solution.

  • Specifications

    Specifications

    Carrier Rollers - Each Side:
    3
    Dig depth (mono):
    8250 mm 27 ft 1 in ft/in
    Dig depth - 2.44m / 8'ft flat bottom:
    8150 mm 26 ft 9 in ft/in
    Dig height (mono):
    15800 mm 51 ft 10 in ft/in
    Dipper Tearout:
    785 kN 176475 lbf
    Displacement:
    50 ltr 3051.1 Inches³
    Dump Height (Mono):
    10100 mm 33 ft 2 in ft/in
    Engine Output Per Engine- Net:
    1069 kW 1434 hp
    Fuel Tank:
    5300 ltr 1400 gallons (US)
    Ground Bearing Pressure:
    187 kPa 27.1 PSI
    Ground Clearance:
    770 mm 30 inches
    Ground level reach (mono):
    16050 mm 52 ft 8 in ft/in
    Hydraulic Tank:
    1320 ltr 349 gallons (US)
    Max Digging Reach (Mono):
    16600 mm 54 ft 6 in ft/in
    Net Power:
    1119 kW 1,500 hp
    Number Of Cylinders - Per Engine:
    16
    Overall Width:
    8040 mm 26 ft 5 in ft/in
    Rated Speed:
    1800 rpm
    Tailswing Radius:
    6490 mm 21 ft 4 in ft/in
    Track Gauge:
    5000 mm 16 ft 5 in ft/in
    Track Length On Ground:
    6120 mm 20 ft 1 in ft/in
    Track Rollers - Each Side:
    8
    Track Shoe Width:
    1000 mm 40 inches
    Undercarriage Overall Length:
    7870 mm 25 ft 10 in ft/in
    Weight - Maximum:
    257000 kg 566588 lbs
    Width over standard tracks:
    6000 mm 19 ft 8 in ft/in
  • Downloads & Documentation

Contact

Contact

Consignment

Request a Service

×

Coastline Equipment Employee Portal

×

Your session will expire in  seconds. If you want to reset this timer, please click OK.