ZX60USB-5
ZX60USB-5
ZX60USB-5
ZX60USB-5
ZX60USB-5
ZX60USB-5
ZX60USB-5
ZX60USB-5
More productivity in more places

The ZX60USB-5 bridges the gap between the ZX50U-5 compact and the ZX75US-5 mid-sized excavators. With its reduced-tail-swing design, this compact, yet powerful excavator is perfect for work in congested or confined areas.

By talking and listening to owners, we’ve taken the ZX60USB-5 to a whole new level by adding real-world practical improvements. You get a more spacious cab with wider, easier entry and better visibility; a fuel-efficient and reliable engine that meets emission standards; and maintenance that’s easier than ever thanks to enhancements such as improved access to coolers. Built to the same high standards as our larger mining excavators, the ZX60USB-5 delivers efficiency, reliability and durability to your operation.

Features

  • Heavy-duty shields deflect material and impacts, protecting the boom/blade cylinders and drive motors.

  • Operator station tilts forward 50 degrees simplifying access to the swing motor, hydraulic control valve, engine starter motor, and alternator.

  • Visibility that’s practically unlimited; precise feel; and smooth, accurate control makes the ZX60USB-5 a great fit for excavating in and around existing utilities. and the cab comfortable.

  • The Yanmar diesel engine meets EPA Final Tier 4 (FT4)/EU Stage IV emission regulations. It’s easy to maintain and requires no special additional fluids – just ultra-low-sulfur diesel fuel and CJ-4 engine oil.

  • Single-pin swing-post increases boom stiffness, enhancing the structural integrity of the digging components. Wear-resistant hoses are routed for protection and Cordura®-wrapped where exposed.

  • Match engine speed to the job with power/economy work modes. Choose the power mode and get higher engine speeds for most general digging work. For lighter digging jobs, the economy mode reduces engine speed and noise, and lowers fuel costs.

  • An aftertreatment device and isochronous high-idle speed help keep things noticeably quiet. Rubber cab mounts further isolate the operator from noise and vibration to help reduce fatigue.

  • Seamless diesel particulate filter (DPF) cleaning happens automatically without impacting machine productivity. Minimum service interval is 6,000 hours and can be done by your Hitachi dealer.

  • With plenty of lift height and reach, getting up and over truck sideboards is all in a day’s work.

  • Spacious operator station has a wide entryway, making entrance and exit easier than ever. Flat, skid-resistant floor mats remove easily for clean-out. There’s also a large cup holder and seat back compartment for documents.

  • No operator activation required for high-speed travel. Track speeds automatically slow to low whenever the travel motors encounter a heavier load. Includes a console-mounted, low-speed lock switch.

  • Ergonomic short-throw pilot control levers provide smooth, predictable low-effort fingertip operation.

  • Hinged door provides easy access to the side-by-side oil cooler and radiator for easier core cleanout.

  • Heavy-duty X-frame provides a solid, stable platform that resists material and dirt build-up.

  • Swing boom and foldable travel pedals are positioned where they’re easy to operate, yet allow plenty of foot room.

  • FT4 technology employs field-proven cooled exhaust gas recirculation (EGR) for reducing NOX, and a diesel particulate filter (DPF) and diesel oxidation catalyst (DOC) to reduce particulate matter.

  • Although not a replacement for a grading tractor, standard backfill blades let this excavator fill-in quite capably. An optional all-hydraulic blade angles 25 degrees, left or right, for even more efficient grading and backfilling.

  • Routine checks such as engine oil level are quickly accomplished from ground level. Convenient lube/maintenance chart helps ensure that nothing gets overlooked.

  • The rubber tracks traverse virtually any terrain, including paved surfaces. Also available are steel tracks and steel tracks with rubber pads. The optional rubber grousers combine work-anywhere flexibility with steel-track serviceability.

  • Hydraulic fluid sight gauge and see-through coolant reservoir let you quickly check levels at a glance.

  • Noise-reducing muffler and isochronous high-idle speed help keep things noticeably quiet. Rubber cab mounts further isolate the operator from noise and vibration to help reduce fatigue.

  • Go from backhoe- to excavator-style controls with just a twist of your wrist. Control-pattern selector valve is conveniently located in a compartment beneath the seat.

  • Standard quick-coupler equipped boom-mounted auxiliary hydraulic lines make attachment hook-up a snap. Wedge-style coupler enables quick changes and a wide variety of buckets and attachments, such as breakers and augers.

  • Enhanced monitor provides vital operating info at a glance and fingertip control of several functions, including auto shutdown, power/economy modes, and auto exhaust filter cleaning. Plus two trip meters let you track engine oil and hydraulic oil changes, or jobsite hours.

  • Automatic, high-velocity bi-level climate-control system with automotive-style adjustable louvers help keep the glass clear and the cab comfortable.

  • Vertical spin-on filters allow quick and clean changes. Extended engine and hydraulic oil intervals let you work longer.

Specifications

Dig Depth - Mono Boom:
3770 mm 12 ft 4 in ft/in
Dig Height - Mono Boom:
5960 mm 19 ft 7 in ft/in
Digging Reach - Mono Boom:
6230 mm 20 ft 5 in ft/in
Dipper Tearout:
31.1 kN 6989 lbf
Displacement:
3.3 ltr 203 Inches³
Dump Height - Mono Boom:
4170 mm 13 ft 8 in ft/in
Emission Rating:
Tier 4
Engine Output - Net:
39.6 kW 53 hp
Fuel Tank:
120 ltr 31.7 gallons (US)
Ground Bearing Pressure:
35 kPa 5.12 PSI
Ground Clearance:
340 mm 13 inches
Hydraulic Tank:
80 ltr 21.1 gallons (US)
Max Dig Depth:
3.77 m 12 ft. 4 in.
Max Dig Reach:
6.23 m 20 ft. 5 in.
Net Power:
40 kW 53 hp
Number Of Carrier Rollers - Each Side:
1
Number Of Track Rollers - Each Side:
4
Operating Weight:
6145 kg 13547 lbs
Operating Weight:
6145 kg 13,547 lb.
Overall Undercarriage Length:
2500 mm 8 ft 2 in ft/in
Overall Undercarriage Width:
2000 mm 6 ft 7 in ft/in
Rated speed:
2000 rpm
Tailswing Radius:
1300 mm 4 ft 3 in ft/in
Track Gauge:
1600 mm 5 ft 2 in ft/in
Track Length On Ground:
1990 mm 6 ft 6 in ft/in
Track Shoe Width:
400 mm 16 inches
Transport Height - Maximum:
2540 mm 8 ft 4 in ft/in
Transport Length Mono Boom:
5760 mm 18 ft 11 in ft/in
  • Features

    Features

    • Heavy-duty shields deflect material and impacts, protecting the boom/blade cylinders and drive motors.

    • Operator station tilts forward 50 degrees simplifying access to the swing motor, hydraulic control valve, engine starter motor, and alternator.

    • Visibility that’s practically unlimited; precise feel; and smooth, accurate control makes the ZX60USB-5 a great fit for excavating in and around existing utilities. and the cab comfortable.

    • The Yanmar diesel engine meets EPA Final Tier 4 (FT4)/EU Stage IV emission regulations. It’s easy to maintain and requires no special additional fluids – just ultra-low-sulfur diesel fuel and CJ-4 engine oil.

    • Single-pin swing-post increases boom stiffness, enhancing the structural integrity of the digging components. Wear-resistant hoses are routed for protection and Cordura®-wrapped where exposed.

    • Match engine speed to the job with power/economy work modes. Choose the power mode and get higher engine speeds for most general digging work. For lighter digging jobs, the economy mode reduces engine speed and noise, and lowers fuel costs.

    • An aftertreatment device and isochronous high-idle speed help keep things noticeably quiet. Rubber cab mounts further isolate the operator from noise and vibration to help reduce fatigue.

    • Seamless diesel particulate filter (DPF) cleaning happens automatically without impacting machine productivity. Minimum service interval is 6,000 hours and can be done by your Hitachi dealer.

    • With plenty of lift height and reach, getting up and over truck sideboards is all in a day’s work.

    • Spacious operator station has a wide entryway, making entrance and exit easier than ever. Flat, skid-resistant floor mats remove easily for clean-out. There’s also a large cup holder and seat back compartment for documents.

    • No operator activation required for high-speed travel. Track speeds automatically slow to low whenever the travel motors encounter a heavier load. Includes a console-mounted, low-speed lock switch.

    • Ergonomic short-throw pilot control levers provide smooth, predictable low-effort fingertip operation.

    • Hinged door provides easy access to the side-by-side oil cooler and radiator for easier core cleanout.

    • Heavy-duty X-frame provides a solid, stable platform that resists material and dirt build-up.

    • Swing boom and foldable travel pedals are positioned where they’re easy to operate, yet allow plenty of foot room.

    • FT4 technology employs field-proven cooled exhaust gas recirculation (EGR) for reducing NOX, and a diesel particulate filter (DPF) and diesel oxidation catalyst (DOC) to reduce particulate matter.

    • Although not a replacement for a grading tractor, standard backfill blades let this excavator fill-in quite capably. An optional all-hydraulic blade angles 25 degrees, left or right, for even more efficient grading and backfilling.

    • Routine checks such as engine oil level are quickly accomplished from ground level. Convenient lube/maintenance chart helps ensure that nothing gets overlooked.

    • The rubber tracks traverse virtually any terrain, including paved surfaces. Also available are steel tracks and steel tracks with rubber pads. The optional rubber grousers combine work-anywhere flexibility with steel-track serviceability.

    • Hydraulic fluid sight gauge and see-through coolant reservoir let you quickly check levels at a glance.

    • Noise-reducing muffler and isochronous high-idle speed help keep things noticeably quiet. Rubber cab mounts further isolate the operator from noise and vibration to help reduce fatigue.

    • Go from backhoe- to excavator-style controls with just a twist of your wrist. Control-pattern selector valve is conveniently located in a compartment beneath the seat.

    • Standard quick-coupler equipped boom-mounted auxiliary hydraulic lines make attachment hook-up a snap. Wedge-style coupler enables quick changes and a wide variety of buckets and attachments, such as breakers and augers.

    • Enhanced monitor provides vital operating info at a glance and fingertip control of several functions, including auto shutdown, power/economy modes, and auto exhaust filter cleaning. Plus two trip meters let you track engine oil and hydraulic oil changes, or jobsite hours.

    • Automatic, high-velocity bi-level climate-control system with automotive-style adjustable louvers help keep the glass clear and the cab comfortable.

    • Vertical spin-on filters allow quick and clean changes. Extended engine and hydraulic oil intervals let you work longer.

  • Specifications

    Specifications

    Dig Depth - Mono Boom:
    3770 mm 12 ft 4 in ft/in
    Dig Height - Mono Boom:
    5960 mm 19 ft 7 in ft/in
    Digging Reach - Mono Boom:
    6230 mm 20 ft 5 in ft/in
    Dipper Tearout:
    31.1 kN 6989 lbf
    Displacement:
    3.3 ltr 203 Inches³
    Dump Height - Mono Boom:
    4170 mm 13 ft 8 in ft/in
    Emission Rating:
    Tier 4
    Engine Output - Net:
    39.6 kW 53 hp
    Fuel Tank:
    120 ltr 31.7 gallons (US)
    Ground Bearing Pressure:
    35 kPa 5.12 PSI
    Ground Clearance:
    340 mm 13 inches
    Hydraulic Tank:
    80 ltr 21.1 gallons (US)
    Max Dig Depth:
    3.77 m 12 ft. 4 in.
    Max Dig Reach:
    6.23 m 20 ft. 5 in.
    Net Power:
    40 kW 53 hp
    Number Of Carrier Rollers - Each Side:
    1
    Number Of Track Rollers - Each Side:
    4
    Operating Weight:
    6145 kg 13547 lbs
    Operating Weight:
    6145 kg 13,547 lb.
    Overall Undercarriage Length:
    2500 mm 8 ft 2 in ft/in
    Overall Undercarriage Width:
    2000 mm 6 ft 7 in ft/in
    Rated speed:
    2000 rpm
    Tailswing Radius:
    1300 mm 4 ft 3 in ft/in
    Track Gauge:
    1600 mm 5 ft 2 in ft/in
    Track Length On Ground:
    1990 mm 6 ft 6 in ft/in
    Track Shoe Width:
    400 mm 16 inches
    Transport Height - Maximum:
    2540 mm 8 ft 4 in ft/in
    Transport Length Mono Boom:
    5760 mm 18 ft 11 in ft/in
  • Downloads & Documentation

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Coastline Equipment Employee Portal

×

Your session will expire in  seconds. If you want to reset this timer, please click OK.